Free Pulp & Paper News Email. Subscribe Now!
0
Nov 16,2017---In 2016 Smurfit Kappa awarded Toscotec with the rebuilding of the Company´s Barbosa paper machine’s dryer section. The target operating speed of the machine after startup was set at 1,000 mpm...
0
Nov 14,2017---ANDRITZ to supply baling line with bale tracking to Sappi Saiccor
International technology Group ANDRITZ has received an order from Sappi Saiccor to supply a baling line with bale tracking for its mill in Saiccor, South Africa. Start-up is scheduled for 2018...
0
Nov 14,2017---As a next step in the capacity development of Rottneros Mill, Rottneros’ Board has granted further investments in the CTMP line. The investment, CTMP Step 2, increases capacity by approximately 18,000 tonnes per year and is expected to be operational in the fall of 2018. The investment follows the strategic development plan Agenda 500, where a first capacity-enhancing investment in the CTMP line was made in 2016...
0
Modugno (Ba) Nov 13, 2017 – Two years after the acquisition in April 2015, Pro-Gest Group completes the expansion of the Trevikart Modugno plant, doubling its surface from 13,000 sqm to 30,000 sqm. The total investment of € 20 million is aimed at renovating and upgrading the plant, with focus on the packaging for the agro-industrial sector, and in particular fruit and vegetables, pasta, cookies and sweets, and the dairy segment...
0
Nov 13,2017---Voith Paper concluded, in October, the start-up of the new XcelLine VTM 3 tissue machine it has supplied to US tissue and specialty paper manufacturer Little Rapids Corporation. The new machine has replaced the company’s old PM 3 at its Shawano production facility in Wisconsin...
0
UPM,Helsinki/Montevideo Nov 8, 2017 ---- UPM and the Government of Uruguay have signed an investment agreement, which outlines the local prerequisites for a potential pulp mill investment. The agreement details the roles, commitments and time-line for both parties as well as the relevant items to be agreed prior to the final investment decision...
0
Nov 7,2017---Start-up of the new plant is scheduled for the second quarter of 2019 and of the rebuild for the fourth quarter of 2019.The new 7-effect high dry solids evaporation plant will have a capacity of 350 t/h evaporated water. It will replace an old ANDRITZ evaporation line from the 1970’s and significantly enhance energy efficiency at the Iggesund mill...
0
Oct 31, 2017 ---Valmet has been selected to supply a Valmet DNA Control System for the new Solid Recovered Fuels (SRF) boiler Blue Paper SAS is building in its site in Strasbourg, France. The order was included in Valmet's third quarter of 2017 orders received. The value of the order will not be disclosed. The delivery is scheduled for early 2018, and process start-up is planned for spring 2018...
0
DRUMMONDVILLE, QC, Oct. 31, 2017 --- Cascades Inc. (TSX: CAS), a leader in the recovery and manufacturing of green packaging and tissue products, announced today a $21-million investment in its Cascades Inopak (Drummondville) and Plastiques Cascades (Kingsey Falls) plants in order to acquire equipment enabling it to increase its production of food packaging, primarily for the fresh protein market...
0
Oct 28,2017---A.Celli Paper enthusiastically encourages St. Croix Tissue Inc. (USA) with professionalism by providing equipment in-line with their needs.A new tissue rewinder and roll handling system by A.Celli Paper for the US company that has recently entered the world of tissue manufacturing...
0
Oct 25, 2017---Stora Enso will invest EUR 94 million to grow in renewable materials and to increase competitiveness in consumer board and biomaterials. EUR 52 million will be invested to increase the dissolving pulp production capacity at Enocell Mill and EUR 42 million to enhance the availability of the chemi-thermomechanical pulp (CTMP) at Imatra Mills. Both mills are located in Finland...
0
Oct 25, 2017 - In light of the global market situation for graphic papers, and to sustain its competitiveness and leading position in the market, UPM Paper ENA plans to.optimize operations at its UPM Nordland Papier and UPM NorService units in Dörpen, Germany, Europe's biggest fine paper site. Streamlining internal processes and investing in automation will enable a sustainable improvement of the fixed cost structure...
0
Oct 17,2017---International technology Group ANDRITZ has successfully started up the TM6 tissue machine delivered to Guizhou Chitianhua Paper Industry Co., Ltd. (Taison Group), Guizhou Province, China. The new PrimeLineST tissue machine, with a design speed of 2,000 m/min and a paper width of 5.6 meters, will produce high-quality facial wipes and toilet paper, as well as paper tissues based on bamboo furnish...
0
Oct 13,2017---Toscotec is pleased to announce an important expansion of the company’s structure of the Paper & Board division, with a new technical and commercial unit based in Orbassano, in the province of Turin, which fully integrates into the existing team...
0
Oct 13, 2017---Smurfit Kappa Mexico has invested US $62 million in a new machine which began operating recently in the Los Reyes Paper Mill, north of Mexico City.The PM6 machine, which has a production capacity of 100,000 tons of recycled containerboard per year, will facilitate greater integration within the Group’s converting plants and significantly increase the energy efficiency of the Los Reyes plant...
0
PALO ALTO, Calif. and AMSTERDAM, Oct. 12, 2017 -- Rubrik, the Cloud Data Management Company, announced today that Stora Enso has deployed Rubrik's market-leading data management platform at their paper mill in Langerbrugge, Ghent to protect their virtual and physical workloads. Stora Enso, headquartered in Helsinki, Finland, is a leading provider of renewable solutions in packaging, biomaterials, wooden constructions, and paper on global markets....
0
VANCOUVER, Oct. 10, 2017- - Fortress Paper Ltd. ("Fortress Paper" or the "Company") (TSX:FTP) (OTCQX:FTPLF) is pleased to announce that the Fortress Specialty Cellulose Mill (the "FSC Mill") restarted on October 6, 2017, three days earlier than previously announced in its September 27, 2017 news release. The Company has completed the necessary repairs at the FSC Mill caused by the failure of a pressurized auxiliary gas collection system and has re-commenced production of dissolving pulp...
0
Zurich, Switzerland, Oct 10, 2017--- ABB AbilityTM Collaborative Operations Center opens in Helsinki, Finland Expands the global network of ABB industry experts, digital technologies and knowledge base to improve customers profitability and efficiency...
0
Oct 9, 2017 ---Valmet will supply a vast grade conversion rebuild with a wide scope of automation for Sappi Lanaken Mill in Belgium. In the project, the mill's paper machine 8 (PM8) currently producing lightweight coated (LWC) paper grades will be rebuilt to also produce lightweight and high-quality woodfree coated paper grades, which the mill will gradually start producing. The start-up of the rebuilt machine is scheduled for 2019...
0
(Olšany / Czech Republic--Oct 09 2017). delfort, the global innovation leader in the development, manufacturing and distribution of special and functional papers, announces an investment of more than 150 Million Euro into a new paper machine in its paper mill in Olšany, Czech Republic...
PaperIndex Times is Powered by